Step 2: Connect Your First Computer To The Intelligent Gateway; Choose A Computer And Connection Type - 2Wire Intelligent Gateway 1800 User Manual

2
Step
Connect Your First Computer
to the Intelligent Gateway

Choose a computer and connection type

The first computer you connect to your local network is used to configure the Intelligent Gateway for
proper operation, and should be located in the same room as the Intelligent Gateway. Choose one of the
following methods to connect your first computer to the Intelligent Gateway. Save and close all open
programs before you begin connecting your Intelligent Gateway.
Connection Type
Ethernet
Requires: A computer with an Ethernet port.
Recommended for: Primary computer in the same room as the Intelligent
Gateway.
USB
Requires: A computer with an available USB port. See the USB connection
option for exceptions.
Recommended for: Primary computer in the same room as the Intelligent
Gateway.
6
Go to...
page 7
page 8