Led Status In Di Ca Tor - Clifford Polaris 4 Installation Manual

Pas sen ger Com part ment Con nec tions (Con tin ued)
Select a prominent location on the dash or console visible through all windows. Discuss
placement with the owner.
1. Verify there is adequate space to accommodate the LED, then drill a 5/16" (8mm) hole
and route the wires through it.
2. Mate the LED connectors to the VIOLET and BLACK wire connectors as shown in the
diagram on page 4.
3. Press the LED into place.
Door Locks (Con tin ued)

LED Status In di ca tor

7