Table of Contents
Advertisement
Sys tem Check list & Trou ble shoot ing (Con tin ued)
Step 15.
Test remote control range.
Stand approximately 40 feet from the vehicle and use the remote control to arm and disarm
the system.
n The Polaris 4 will re spond with the pre vi ously noted in di ca tions fo arm ing and
dis arm ing. If not:
§ Re po si tion the antenna or control unit as high up as possible un der the dash or on the
windshield and as far as pos si ble from heavy wire looms and metal and re-test.
§ Make sure that the re mote con trol bat tery meas ures at least 3 volts while trans mit ting.
§ Make sure that the volt age at the con trol unit be tween the 5A fused power line and
each of the two ground lines meas ures at least 12.0 volts (if less, make sure both
grounds are solid; if the grounds are solid, the ve hi cle battery may need charg ing,
serv ic ing or re place ment).
Step 16.
Dis trib ute all nec es sary pa per work in clud ing:
n User's Manual must be given to the customer.
n Adhere the Clifford window decals to the vehicle's windows after discussing placement
with the vehicle owner.
Step 17.
Dem on strate Ba sic Sys tem Op era tion:
Remote control operation:
n Arming and locking
n Disarming and unlocking
n Panic button
n Accessory Activation
AutoArming and AutoArming Bypass
Valet code entry
User-programming mode
22
Advertisement
Table of Contents
