Wiring Connections; Main Harness (H1), 6-Pin Connector; H2 Harness, 24-Pin Connector - Directed Electronics Viper 5904 Installation Manual

Wiring Connections

Main Harness (H1), 6-pin connector

RED
H1/1
H1/2 BLACK
H1/3 BROWN
H1/4 WHITE/BROWN
H1/5 WHITE
H1/6 ORANGE

H2 Harness, 24-pin connector

PINK/WHITE
BLACK/WHITE
PINK/WHITE
H2/1
H2/2 BLACK/WHITE
H2/3 BLUE/WHITE
H2/4 GREEN/BLACK
H2/5 RED/WHITE
H2/6 GREEN
H2/7 BLACK/YELLOW
H2/8
BROWN/BLACK
H2/9 DARK BLUE
H2/10 PINK
H2/11 WHITE/BLACK
H2/12 VIOLET
H2/13 WHITE/VIOLET
H2/14 VIOLET/BLACK
H2/15 ORANGE/BLACK
H2/16 BROWN
H2/17 GREY
H2/18 VIOLET/YELLOW
H2/19
BLUE
H2/20 GREY/BLACK
H2/21 WHITE/BLUE
H2/22 ORANGE
H2/23 VIOLET/WHITE
H2/24 GREEN/WHITE
*The Normally Closed setting will only work if one of the vehicle's doors is connected. If more than one door
is to be monitored, then it is recommended to use the Xpresskit DTIMAZDA or tech tip # 1921 on www.di-
rectechs.com to interface with these types of vehicles.
6
(+)12VDC CONSTANT INPUT
(-) CHASSIS GROUND
(+) SIREN OUTPUT
PARKING LIGHT ISOLATION WIRE - PIN 87a of onboard relay
PARKING LIGHT OUTPUT
(-) 500mA GROUND WHEN ARMED OUTPUT
1 3 5 23
2 4 6 24
INSERTION SIDE
(-) 200mA IGNITION/FLEX RELAY CONTROL OUTPUT
(-) NEUTRAL SAFETY INPUT
(-) 200mA 2ND STATUS /REAR DEFOGGER OUTPUT
(-) 200mA OEM ALARM DISARM OUTPUT
(-) 200mA TRUNK RELEASE OUTPUT
(-) DOOR TRIGGER INPUT (N/C* OR N/O)
(-) 200mA DOME LIGHT SUPERVISION OUTPUT
(-) 200mA HORN HONK OUTPUT
(-) 200mA STATUS OUTPUT
(-) 200mA IGNITION 1 OUTPUT
(-) 200mA AUX 3 OUTPUT
(+) DOOR TRIGGER INPUT
(-) 200mA AUX 1 OUTPUT
(-) 200mA AUX 2 OUTPUT
(-) 200mA AUX 4 OUTPUT
(+) BRAKE SHUTDOWN INPUT
(-) HOOD PIN INPUT (N/C OR N/O)
(-) 200mA STARTER OUTPUT
(-) TRUNK PIN/ INSTANT TRIGGER INPUT (N/C OR N/O)
(-) DIESEL WAIT TO START INPUT
(-) REMOTE START/ TURBO TIMER ACTIVATION INPUT
(-) 200mA ACCESSORY OUTPUT
TACHOMETER INPUT
(-) 200mA OEM ALARM ARM OUTPUT
VIOLET/WHITE
GREEN/WHITE
© 2011 Directed Electronics. All rights reserved.