Setting Memory Positions And Linking Rke; Transmitter To Memory - RAM Truck 2012 Owner's Manual

Memory Seat Buttons
The memory buttons 1 and 2 can be programmed to
recall the driver's seat position, driver's outside mirror
position, adjustable brake, accelerator pedals position
and radio station preset settings. Your Remote Keyless
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141
Entry (RKE) transmitters can also be programmed to
recall the same positions when the UNLOCK button is
pressed.
NOTE: The power lumbar option is not programmable
with driver memory seats.
Your vehicle was delivered with two RKE transmitters.
One or both RKE transmitters can be linked to either
memory position. The memory system can accommodate
up to two RKE transmitters, each RKE transmitter linked
to either of the two memory positions.

Setting Memory Positions And Linking RKE

Transmitter To Memory

NOTE: Each time the S (SET) button and a numbered
button 1 or 2 are pressed, you erase the memory settings
for that button and store a new one.
1. Insert the ignition key, and turn the ignition switch to
the ON/RUN position.
3