Setting Memory Positions And Linking Rke; Transmitter To Memory - RAM Cargo Van 2014 Owner's Manual

198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
radio station preset settings. Your Remote Keyless Entry
(RKE) transmitters can also be programmed to recall the
same positions when the UNLOCK button is pressed.
Driver Memory Switch
Your vehicle may have been delivered with two RKE
transmitters. Only one RKE transmitter can be linked to
each of the memory positions.

Setting Memory Positions And Linking RKE

Transmitter To Memory

NOTE: Each time the SET (S) button and a numbered
button (1 or 2) is pressed, you erase the memory settings
for that button and store a new one.
1. Insert the ignition key and turn the ignition switch to
the ON position.
2. Adjust the driver's seat, recliner, and driver's side-
view mirror to the desired positions.
3. Adjust the brake and accelerator pedals to the desired
positions.
4. Turn on the radio and set the radio station presets (up
to 10 AM and 10 FM stations can be set).
5. Turn the ignition switch to the OFF position and
remove the key.