List Or Browse Mode - RAM Truck 2012 Owner's Manual

• Pressing the REPEAT button will change the audio
device mode to repeat the current playing track or
press the VR button and say Repeat ON or Repeat
Off .
• Press the SCAN button to use iPod /USB/MP3 de-
vice scan mode, which will play the first 10 seconds of
each track in the current list and then forward to the
next song. To stop SCAN mode and start playing the
desired track, when it is playing the track, press the
SCAN button again. During Scan mode, pressing the
<< SEEK and SEEK >> buttons will select the previ-
ous and next tracks.
• RND button (available on sales code RES radio only):
Pressing this button toggles between Shuffle ON and
Shuffle OFF modes for the iPod
device, or press the VR button and say Shuffle ON or
Shuffle Off . If the RND icon is showing on the radio
display, then the shuffle mode is ON.

List Or Browse Mode

During Play mode, pressing any of the buttons described
below, will bring up List mode. List mode enables
scrolling through the list of menus and tracks on the
audio device.
• TUNE control knob: The TUNE control knob functions
in a similar manner as the scroll wheel on the audio
device or external USB device.
• Turning it clockwise (forward) and counterclock-
wise (backward) scrolls through the lists, displaying
the track detail on the radio display. Once the track
to be played is highlighted on the radio display,
press the TUNE control knob to select and start
playing the track. Turning the TUNE control knob
or external USB fast will scroll through the list faster. During fast
scroll, a slight delay in updating the information on
the radio display may be noticeable.
UNDERSTANDING YOUR INSTRUMENT PANEL 251
4