Using The Fan - Bryant Legacy Owner's Manual

Operating the Thermostat

Using the fan

The fan function helps distribute warmth or cooling throughout your
home for a more even temperature in all spaces. The thermostat is
automatically set so that the fan runs only during your heating and
cooling cycles (auto mode). However, you can adjust the settings so
that the fan runs continuously, even between cycles or when the
system is turned off.
1. Open the door.
2. Press the fan button on the left side. You will see fan on
in the lower left corner of the display.
3. To return the fan to auto mode, press the fan button
again. You will see fan auto on the display.
4. Close the door.
33