Table of Contents
Advertisement
Fan
The Fan menu displays the current fan setting. Depending on your system, one or more of the following options are shown:
S On: Fan runs continuously, regardless of the scheduled programming. The fan will also run if the System Mode is Off.
S Auto: Fan runs when the system is actively heating or cooling your home, or to satisfy the Air Circulation setting.
You can temporarily switch between Auto and On. If you do, the fan will operate temporarily at this setting for the length of time that you
specified for your default Touch- N- Go hold time.
On Thermostat and Smartphone App:
From the Home Screen, touch Fan in the upper left corner of the screen, OR: touch Menu > System > Fan Mode
On Web Portal:
Touch Fan in the upper left corner of the Home Screen tile
Air Circulation Mode
Especially useful in mild weather or seasons when your system is not running frequently, you can use this setting to circulate the air in your
home even if your system is not heating or cooling. When the fan is in Auto mode, the thermostat operates according to the Air Circulation
setting. You can adjust this setting from 0 to 55 minutes.
When your system is in heat or cool mode, the fan will always run for this minimum amount of time. A longer fan runtime increases air
circulation and results in a more consistent temperature than with the Auto setting alone, while being more cost- effective than the On setting.
Your thermostat will meet this minimum time over the hour while making sure it never runs for less than five minutes at a time to reduce
energy inefficiencies.
On Thermostat and Smartphone App:
1. Touch Menu > Profiles > Air circulation
2. Touch the up or down arrow repeatedly until the desired time is displayed
3. Touch Save
On Web Portal:
1. Select the My System tile
2. Select Fan
3. Use the slider to select the desired time
4. Touch the X in the upper right corner to close the window
8
A150010
Advertisement
Table of Contents
