Bryant Legacy Owner's Manual page 30

Programming the Thermostat
7. Press home, away or sleep.
8. Press the period button twice. P3 will flash on the display.
9. Press home, away or sleep.
10. Press the period button twice. P4 will flash on the display.
11. Press home, away or sleep.
12. If you did not select all days when you started this process, then
repeat all the steps for your remaining timeframe choice –
weekdays or weekends.
13. To confirm that the thermostat has accepted your changes, cycle
through the four time periods by pressing days, selecting your time
frame – all days, weekdays, or weekends – and then pressing the
period button to see the Touch 'N' Go option assigned for each
start time. Each time you press period, you will advance to the next
start time.
14. Press done or close the door.
29