Start-Up -> Dehum For Fan Coil Or Furnace - Bryant ecobee3 lite Pro Advanced Installation And Configuration Instructions

: Advanced Installation and Configuration Instructions

Start-Up –> Wiring -> Accessory

If an accessory is wired to the ACC terminals, the type of accessory must be selected. The screens that follow will depend on the selection made here.

Initial Start-Up –> Wiring -> Standard

During installation, the thermostat will automatically detect which terminals have wires connected. If something is incorrect, check the terminations at

the thermostat backplate and at the equipment.

In rare cases, the thermostat will not be able to detect certain wires. In this case they will need to be manually Modified on the screen. Select Modify

and then select the wires that are connected. An example of this would be if a Venstar Add-A-Wire Kit is installed.

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

Start-Up –> Dehum for Fan Coil or Furnace

A200468

A200469

Table of Contents