Bryant Legacy Owner's Manual page 25

Programming the Thermostat
10. To change the minutes, press the start time button on the bottom
of the screen again. You will see the minutes in 8:00 AM flashing
on the screen. Press the up or down button and stop on the
desired time.
11. To change the start time for period 3 (P3), press the period button
at the bottom of the screen three times. This displays the information
for period 3, with P3 flashing on the display.
12. You will see the hours in 5:00 PM flashing on the screen. Press the
up or down button and stop on the desired time.
13. To change the minutes, press the start time button on the bottom of
the screen again. You will see the minutes in 5:00 PM flashing on the
screen. Press the up or down button and stop on the desired time.
14. To change the start time for period 4 (P4), press the period button at
the bottom of the screen repeatedly. This displays the information for
period 4, with P4 flashing on the display.
15. You will see the hours in 10:00 PM flashing on the screen. Press the
up or down button and stop on the desired time.
16. To change the minutes, press the start time button on the bottom
of the screen again. You will see the minutes in 10:00 PM flashing
24