Suzuki LT-F400 Owner's Manual page 25

Dimmer Switch 3
Use the dimmer switch to select
the high or low headlight beam
when the ignition switch is in the
"(LIGHTS)" position. When you
move the dimmer switch to the
"" position, the high beam will
light and the high beam indicator
light will come on. When you
move the dimmer switch to the
"" position, the low beam will
light.
CAUTION
Improper dimmer switch opera-
tion can damage the ATV.
Holding the dimmer switch
between "" and "" posi-
tion will light both "" and
"" headlight beam. This
operation can damage the ATV.
Use the dimmer switch only at
"" or "" position.
CAUTION
Sticking some tape or placing
objects in front of the headlight
can damage the headlight.
Sticking some tape or placing
objects in front of the headlight
can obstruct headlight heat
radiation. This can result in
headlight damage.
Do not stick any tapes to the
headlight. Do not place objects
in front of the headlight.
www.quad-forum.sk
2-11