Table of Contents
Advertisement
Steps before using a new power
cutter.
•
This machine is a hydraulically operated power cutter
intended for free-hand cutting. The machine should be
connected to a hydraulic unit with an oil flow of 35-42
litres/min and a maximum pressure of 150 bar.
•
Please read the operator's manual carefully.
•
Check the cutting blade's mounting, see the chapter
"Assembly".
Let your Husqvarna dealer check the power cutter and make
essential adjustments and repairs.
WARNING! Under no circumstances may the
!
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
WARNING! Use of products which cut, grind,
!
drill, sand or shape material can generate
dust and vapors which may contain harmful
chemicals. Know the nature of the material
being worked on and wear appropriate dust
mask or respirator protection.
WARNING! A power cutter is a dangerous
!
tool if used carelessly or incorrectly and can
cause serious, even fatal injuries. It is
extremely important that you read and
understand the contents of this Operator's
Manual.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
All information and all data in the Operator's Manual were
applicable at the time the Operator's Manual was sent to print.
Personal protective equipment
WARNING! You must use approved personal
!
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
•
Protective helmet
•
Hearing protection
•
Protective goggles or a visor
SAFETY INSTRUCTIONS
•
Breathing mask
•
Heavy-duty, firm grip gloves.
•
Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
•
Use leg-guards recommended for the material to be cut.
•
Boots with steel toe-caps and non-slip sole
•
Always have a first aid kit nearby.
Machine' ' ' ' s safety equipment
This section describes the machine's safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the "What is
what?" section to locate where this equipment is positioned
on your machine.
WARNING! Never use a machine that has
!
faulty safety equipment! Carry out the
inspection, maintenance and service
routines listed in this section.
Switch
The switch is used to start and stop the machine.
– 5
English
Hide quick links:
Advertisement
Table of Contents
