Fujitsu CELSIUS R920 Operating Manual page 71

Install the cross-piece
► Fit the cross-piece and connect the fan cables.
► Fold the cross-piece down (1) and make sure that the catches engage in
the openings provided for them (2).
Make sure that no cables become pinched.
► Install the hood.
► Secure all the cables previously detached.
► If a type 2 board was installed and it was secured to the cross-piece, install the latter
again (see "Remove and install type 2 boards", Page
Fujitsu Technology Solutions
1
2
System expansions
2
69).
67