Download  Print this page

Alarm And Sleep Operation - Sharp DK-A10 User Manual

Music system for ipod
Hide thumbs

Advertisement

Notes:
• If steps 1 - 6 above are done using the remote control, press the
ALARM ON/OFF button on main unit to activate the alarm.
• To switch off illumination and display in demonstration mode,
press the E SOUND/DEMO button.
Changing alarm source only
• After source is selected in step 2, press and hold the ALARM button.
• If TUNER is selected, press and hold the ALARM button after preset
station is selected in step 3.
• The time and volume will be automatically set to the previous setting.
Activating and deactivating the alarm
1
Press the ALARM ON/OFF button on main unit to activate and
deactivate the alarm function. When activated:
• During power on, "ALARM" will appear.
• During stand-by mode, ALARM indicator will light up.
2
Set to CLOCK function, stand-by mode or demonstration mode.
Checking the alarm setting
• Press the ALARM button.
• The selected source or buzzer type will blink.
• The unit will display the alarm time for 3 seconds.
• During stand-by mode, the display will remain for 6 seconds.
Example: The time is 10:00 AM and iPod function is selected.
Notes:
• Buzzer sound will be output from right speaker only.
• Alarm will not activate during power on mode.
• When iPod is selected in step 2, if iPod unit is not detected during
alarm activation, source will automatically change to BUZZER 1.
• When CD is selected in step 2, if disc is not detected during
alarm activation, source will automatically change to BUZZER 1.
• When performing alarm using another unit connected to AUX,
select AUX in step 2. The unit will turn on and enter the clock
function automatically, however, the connected unit to AUX will
not turn on or off.
• When the entire preset memory is erased (page 25), source will
automatically change to BUZZER 1 even if TUNER is pre-selected
(step 2).
1
Press and hold the ALARM button for more than 2 seconds.
2
Press the
l+1li
or ~ button to select source or buzzer.
1 Check that the clock is set to the correct time (refer page 14).
If it is not set, you cannot use the alarm function.
2 For iPod playback: Insert iPod to the unit (refer page 16).
3 For TUNER: Set preset memory (refer page 25).
4 For CD playback: Insert disc to the unit (refer page 19).
t
Press the ALARM button.
4
Press the
l+1li
or ~ button to adjust the hour.
Press the ALARM button.
3
If TUNER is selected, press the
l+1li
or ~ button to select a
preset station. Press the ALARM button.
5
Press the
l+1li
or ~ button to adjust the minute.
Press the ALARM button.
6
If other than BUZZER is selected in step 2, press the
l+1li
or ~
or VOL (+ or -) button to select volume.
Press the ALARM button.
Before setting the alarm:
Setting the alarm content
D~~~JgK
Alarm and sleep operation
Alarm
The unit turns on and play desired source (iPod, CD, TUNER, AUX)
or Buzzer sound for 30 minutes.

Advertisement

Table of Contents
loading

  Also See for Sharp DK-A10

  Related Manuals for Sharp DK-A10

This manual is also suitable for:

Dk-a10bk