Sharp DK-A10 User Manual page 17

• Various iPod functions
Function Main unit Remote
Operation
control
Play Press in the pause
(0
8
mode.
Pause
Press in the playback
(0 8
mode.
Track upl
Press in the playback
down
88 88
or pause mode.
If you press the button
in the pause mode,
press the
~ III
button
to start the desired
track.
Fast Press and hold down
forwardl
88
in the playback mode.
reverse
88
Release the button to
resume playback.
Display
- -
iPod back light on.
e
Repeat
- -
Press to toggle repeat
mode.
@
MODE
Shuffle
- -
Press and hold down
to toggle shuffle mode.
@
MODE
iPod operation
The operations described below depend on the generation iPod you
are using.
iPod dock door operation
• Open
When power on the main unit.
• Close
- When turn the main unit to standby mode without iPod unit docked.
- When cancel the demonstration mode without iPod unit docked.
Notes:
1 The iPod dock door remain open when turn the main unit to
demonstration mode or standby mode with iPod unit docked.
2 The iPod dock door remain close when turn to demonstration
mode from standby mode.
System on operation
When the main unit is powered on, the iPod unit will automatically
power on when docked in the unit (including alarm function).
*
Invalid for 3rd iPod Generation.
System off (stand-by operation)
When the main unit is turned to stand-by mode, the docked iPod unit
will automatically turn to stand-by mode and iPod dock door will
remain open.
iPod playback detection function
Once play button on iPod unit is pressed, the unit will automatically
change to iPod function overriding the previous function selected.
Caution:
• Unplug all accessories for the iPod before inserting it into the iPod
dock.
• Stop button (.) is invalid during iPod function.
DK-A10
DK-A10BK
17