Copying An Image From Tape To Card - Sharp ViewCam Slim VL-AX1H Operation Manual

Useful Features
Playback
Copying an Image from
Tape to Card
Available mode:
TAPE-VCR
You can capture your favourite image frame
from a video tape recording and save it on
card.
1
Insert the recorded Mini DV cassette
and a card in the camcorder.
2
Set the camcorder to TAPE-VCR mode,
then begin tape playback.
3
Select the frame number of the image
(see page 50).
MULTI F RAME
OFF: 1-frame picture
9 FRAMES: 9-frame picture
16 FRAMES: 16-frame picture
4
Hold the STILL button half-way down at
the point where the desired image
appears.
• A still picture of the image displays.
Note:
• To cancel the still picture, release the STILL
button.
51
VL-AX1H-045-052
5
Note:
• The size of the image copied with this function is
fixed at 640K480 pixels.
OF F
A UD I O 1 2 A UD I O 1 2 + +
51
Press the STILL button fully to copy the
image to the card.
• The S indicator flashes red while the
image is copied.
01.11.1, 11:08 AM
CARD
A UD I O 1 2 A UD I O 1 2 + +