Attaching The Shoulder Strap; Using The Lens Hood; Power Source; Mounting Surface - Sharp ViewCam Slim VL-AX1H Operation Manual

Attaching the Shoulder
Strap
1
Hold the end of the strap and thread it
through the loop on the left side of the
power source mounting surface.
2
Loosen the strap in the buckle, and feed
the end of the strap through the buckle,
as shown.
3
Draw the strap in the direction of the
arrow to secure.
4-6
To attach the other end of the strap to
the loop on the left side of the hand
strap, open the hand strap flap, and
perform the same procedure.
1
Loop
2
Buckle
3
VL-AX1H-009-021

Using the Lens Hood

When recording outdoors on a sunny day or in a
location with bright lighting, attach the supplied
lens hood to the camcorder. Turn the lens hood
in the direction of the arrow to attach it.
To remove it, turn it in the opposite direction.
Notes:
• The lens cap can still be attached on top of the
lens hood.
• Filters and other accessories cannot be attached
on top of the lens hood.
4
Loop
5
Buckle
6
18 01.11.1, 11:00 AM
18