Basic Operations; Camera Recording; Selecting The Camcorder Mode - Sharp ViewCam Slim VL-AX1H Operation Manual

Basic Operations

Camera Recording

Selecting the Camcorder Mode

This camcorder includes functions for use as both a video
camera for recording and playing back images on a tape and
as a digital still camera for recording and playing back still
images on a card. One of the following camcorder modes
needs to be set before starting any operation.
Camcorder modes
TAPE-CAMERA mode
For recording motion and still images on a
tape.
1
Set the Media Selection
switch to TAPE.
2
Hold down the Lock
button and set the
POWER switch to
CAMERA.
CARD-CAMERA mode
For recording still images on a card.
1
Set the Media Selection
switch to CARD.
2
Hold down the Lock
button and set the
POWER switch to
CAMERA.
Note:
• To turn the power off, set the POWER switch to OFF without pressing the Lock button.
Caution:
• Do not change the camcorder mode by operating the Media Selection switch during recording or
playback, as this may cause damage to the tape or card.
VL-AX1H-022-029
TAPE-VCR mode
For playing back or editing motion and still
images recorded on a tape.
1
Set the Media Selection
switch to TAPE.
2
Hold down the Lock
button and set the
POWER switch to VCR.
Lock button
CARD-VCR mode
For playing back still images recorded on a
card.
1
Set the Media Selection
switch to CARD.
2
Hold down the Lock
button and set the
POWER switch to VCR.
Lock button
22
Media Selection switch
POWER switch
Lock button
Lock button
01.11.1, 11:02 AM
22