Table of Contents
Advertisement
Using Earphones
(Commercially available)
Available modes:
TAPE-VCR, TAPE-CAMERA
You can monitor the sound via stereo ear-
phones (commercially available) during
playback or recording.
Connect the plug of stereo earphones to the
earphones jack on the camcorder as shown
below.
Notes:
• Before connecting stereo earphones, turn the
camcorder volume down to the lowest setting.
• The built-in speaker automatically turns off when
stereo earphones are connected to the ear-
phones jack.
VL-AX1H-022-029
Available modes:
You can connect the camcorder to a TV to
allow a larger audience to enjoy playback.
1
Caution:
• Check that the camcorder, TV, VCR and other
2
Earphones jack
S-video cable (commercially available)
28
Watching Playback on a TV
TAPE-VCR, CARD-VCR
Open the jack cover on the camcorder
(see page 3).
equipment to be used are turned off before
making any connections. Picture noise or
malfunction may occur if any of the above is left
on while making a connection.
Jack cover
Connect the camcorder to your TV (or
VCR) with the supplied audio/video
cable as shown.
Yellow: To video input jack
White: To audio input (L) jack
Red: To audio input (R) jack
S-video cable: To S-video input socket
Audio/video cable
(supplied)
To AV jack
To S-VIDEO socket
:
The arrow shows the signal flow.
01.11.1, 11:02 AM
CHANNEL
/STILL
PAUSE
PLAY
STOP/
EJECT
POWER
TV/VCR SET UP
REC
28
Advertisement
Table of Contents
