Switching Off The Engine; Vehicles With A Turbocharger - Ford B-MAX Owner's Manual

Hide thumbs Also See for B-MAX:
Table of Contents

Advertisement

Starting and Stopping the Engine
A normal filter requires periodic
replacement. The diesel particulate filter
on your vehicle requires periodic
regeneration to maintain its correct
function. Your vehicle will carry out this
process automatically.
If your journeys meet one of the following
conditions:
You drive only short distances.
You frequently switch the ignition on
and off.
Your journeys contain a high level of
acceleration and deceleration.
You must carry out occasional trips with
the following conditions to assist the
regeneration process:
Drive your vehicle in more favorable
conditions, which you will find at higher
vehicle speeds in normal driving, on a
main road or freeway for a minimum
of 20 minutes. This drive may include
short stops that will not affect the
regeneration process.
Avoid prolonged idling and always
observe speed limits and road
conditions.
Do not switch the ignition off.
Select a suitable gear to ideally
maintain engine speed between 1500
and 3000 RPM.

SWITCHING OFF THE ENGINE

Vehicles With a Turbocharger

WARNING
Do not switch the engine off when it
is running at high speed. If you do, the
turbocharger will continue running
after the engine oil pressure has dropped
to zero. This will lead to premature
turbocharger bearing wear.
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Release the accelerator pedal. Wait until
the engine has reached idle speed and then
switch it off.
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents