Table of Contents
Advertisement
Starting and Stopping the Engine
3. Start the engine.
All Vehicles
If the engine does not start, repeat the cold
or hot engine procedure.
Engine Idle Speed after Starting
The speed at which the engine idles
immediately after starting is optimized to
minimize vehicle emissions and maximize
cabin comfort and fuel economy.
The idle speed will vary depending on
certain factors. These include vehicle
component and ambient temperatures as
well as electrical and climate system
demands.
Failure to Start
Vehicles with Manual Transmission
Note: Remove all other keys from the
center console.
If the engine does not crank when the
clutch pedal has been fully depressed and
the ignition key is turned to position III.
1.
Fully depress the clutch and brake
pedals.
2. Turn the key to position III until the
engine has started.
SWITCHING OFF THE ENGINE
Vehicles With a Turbocharger
WARNING
Do not switch the engine off when it
is running at high speed. If you do, the
turbocharger will continue running
after the engine oil pressure has dropped
to zero. This will lead to premature
turbocharger bearing wear.
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Release the accelerator pedal. Wait until
the engine has reached idle speed and then
switch it off.
83
Advertisement
Table of Contents
