Transmission; Manual Transmission; Automatic Transmission; Selector Lever Positions - Ford B-MAX Owner's Manual

MANUAL TRANSMISSION

Selecting Reverse Gear

Do not engage reverse gear when your
vehicle is moving. This can cause damage
to the transmission.

AUTOMATIC TRANSMISSION

WARNINGS
Always set the parking brake fully
and make sure you move the
transmission selector lever to
position P. Switch the ignition off and
remove the key whenever you leave your
vehicle.
Do not apply the brake pedal and
accelerator pedal simultaneously.
Applying both pedals simultaneously
for more than three seconds will limit
engine rpm, which may result in difficulty
maintaining speed in traffic and could lead
to serious injury.
Note: The system performs a series of
checks when you switch the ignition off. You
may hear a slight clicking sound. This is
normal.
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013

Transmission

Selector Lever Positions

P
R
N
D
S
+
-
Apply the brakes before moving the
transmission selector lever and keep
them applied until you are ready to
move off.
Press the button on the transmission
selector lever to change to each position.
The transmission selector lever position
will be shown in the information display.
P (Park)
Move the transmission selector lever
to park only when your vehicle is
stationary.
104
Park
Reverse
Neutral
Drive
Sport mode and manual shifting
Manual shift up
Manual shift down
WARNING
WARNINGS