Instrument Cluster - Ford B-MAX Owner's Manual

• Oil pressure.
• Power steering.
• Stability control.
When a warning lamp or indicator does not
illuminate once you have switched the
ignition on, it indicates a malfunction. Have
the system checked by an authorized
dealer.
Anti-Lock Brake System Warning
Lamp
If it illuminates when you are
driving, this indicates a
malfunction. Your vehicle will
continue to have normal braking without
Anti-lock brake system function.
Brake System Warning Lamp
It will illuminate when you
engage the parking brake and
the ignition is on.
WARNING
Reduce your speed gradually and
stop your vehicle as soon as it is safe
to do so. Use your brakes with care.
If it illuminates when your vehicle is
moving, make sure the parking brake is
disengaged. If the parking brake is
disengaged, this indicates low brake fluid
level or a brake system malfunction. Have
the system checked by an authorized
dealer immediately.
Coolant Temperature Warning
Lamp
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have the system checked by
a an authorized dealer immediately.
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013

Instrument Cluster

as soon as it is safe to do so and switch the
engine off. Check the coolant level. See
Engine Coolant Check (page 158).
Cruise Control Indicator
Cruise Control (page 117).
Direction Indicator Warning Lamp
indicator bulb. See Changing a Bulb
(page 162).
Door Ajar Warning Lamp
Engine Warning Lamps
All Vehicles
If either lamp illuminates when the engine
is running, this indicates a malfunction. The
engine will continue to run but it may have
limited power. If it flashes when you are
driving, reduce the speed of your vehicle
immediately. If it continues to flash, avoid
heavy acceleration or deceleration. Have
the system checked by an authorized
dealer immediately.
59
If it illuminates when you are
driving, this indicates a
malfunction. Stop your vehicle
It will illuminate when you have
set a speed using the cruise
control system. See Using
Flashes during operation. A
sudden increase in the rate of
flashing warns of a failed
It will illuminate when you switch
the ignition on and remains on if
any door or the hood is open.
Malfunction Indicator Lamp
Powertrain Warning Lamp