Checking Operation - Kenmore ELECTRIC WALL OVEN Installation Instructions Manual

KENMORE ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
Flexible Appliance Conduit
Wall Oven Cabinet
Figure 10 - TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRIC BUILT-IN OVEN

7. Checking Operation

Your model is equipped with an Electronic Oven
Control. Each of the functions has been factory checked
before shipping. However, it is suggested that you verify
the operation of the electronic oven controls once more.
Refer to the Use and Care Guide for operation.
1. Remove all items from the inside of the oven.
2. Turn on the power to the oven (Refer to your Use &
Care Guide).
3. Verify the operation of the electronic oven controls:
Bake– Verify that this function makes the oven hot.
20 seconds after turning oven on, open the door and
you should feel heat coming from the oven.
Broil– When the oven is set to BROIL, the upper
element in the oven should become red.
Convection (some models)–When the oven is set for
a convection baking or roasting, both elements cycle
on and off alternately and the convection fan will run.
The convection fan will stop running when the oven
door is opened.
(and Optional Electric or Gas Cooktop Combination)
Flare
Union
Cabinet sides or
filler panel
WITH A GAS COOKTOP ABOVE
18"(45.7 cm) Max.
5" Max. 6 1/2" Min.
(12.7 cm) (16.5 cm)
Flare
Union
Before You Call for Service
Read the Before You Call for Service Checklist and
operating instructions in your Use and Care Guide.
It may save you time and expense. The list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Refer to your Use and Care Guide for Sears service
phone numbers, or call 1-800-4-MY-HOME
8
4"(10 cm)
Right Side
of Cabinet
120V/60Hz
Grounded
Outlet
Pressure
Regulator
Manual Shutoff Valve
(To be accessible for shut-off
valve operation)
.
®