Table of Contents
Advertisement
Available languages
Available languages
Installation Instructions
Pre-Test Checklist
Remove
all protective
film, if present,
and any stickers.
Check to be sure that all wiring is
secure and not pinched
or in contact
with moving parts.
[_
Check that the bottom trim is installed
properly
(see page 11).
[_
Check to be sure the mounting screws
are installed and flush with the side trim
(see page 10).
Operation Checklist
Remove
all items from the inside
of the oven.
Check that conduit is securely
connected to the junction box.
Turn on the power to the oven.
(Refer to your Use and Care Guide.)
Verify that the bake and broil units,
and all cooking functions
operate
properly.
Check that the circuit breaker
is not
tripped nor the house fuse blown.
See your Use and Care Guide for
troubleshooting
list.
NOTE TO ELECTRICIAN:
The power
leads supplied
with this appliance
are UL recognized
for connections
to larger gauge household
wiring.
The insulation
of these leads is
rated at temperatures
much higher
than the temperature
rating of
household
wiring.
The current
carrying
capacity
of a conductor
is governed
by the wire gauge and
also the temperature
rating of the
insulation
around the wire.
NOTE: ALUMINUM
WIRING
A.
WARNING:
IMPROPER
CONNECTION
OF ALUMINUM
HOUSE WIRING TO THE COPPER
LEADS CAN RESULT IN AN
ELECTRICAL
HAZARD OR FIRE,
S.
Splice copper wires to aluminum
wiring
using special connectors
designed
and UL approved
for
joining
copper to aluminum,
and follow the manufacturer's
recommended
connector
procedure
closely.
NOTE: Wire used, location
and
enclosure
of splices, etc., must
conform
to good wiring
practice
and local codes.
13
Hide quick links:
Advertisement
Table of Contents
