Ch 2. First Time Configuration; Before Start To Configure; Knowing The Network Application - LevelOne WAP-6010 User Manual

N_max wireless access point
Hide thumbs Also See for WAP-6010:
Table of Contents

Advertisement

Ch 2. First Time Configuration

Before Start to Configure

The configuration of this device is through web-browser. To access the configuration
interfaces, make sure you are using a computer connected to the same network as the
device. The default IP address of the device is 192.168.0.254, and the subnet-mask is
255.255.255.0. For the first time configuration, please login with username: admin and
password: admin.
Please note that the DHCP server inside the device is default to up and running. Do not
have multiple DHCP servers in your network environment, otherwise it will cause
abnormal situation.

Knowing the Network Application

The device can act as the following roles, and it supports WDS (Wireless Distribution
System) function.
The device provides 5 different operation modes and the wireless radio of device can act
as AP/AP Client/Bridge/WDS/Repeater. The operation mode is about the communication
mechanism between the wired Ethernet NIC and wireless NIC. Following are the types of
operation mode.
7

Advertisement

Table of Contents
loading

Table of Contents