Firmware Upgrade; Time Settings - LevelOne WAP-3101 User Manual

WAP-3101 Ceiling Mount PoE Wireless AP

Firmware Upgrade


Click on the Upgrade Firmware link under the Management menu. This page is
used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.

Click on the Browse button and then select the appropriate firmware and then click
on the Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power off
the device during this process as it may crash the device and make it unusable. The
device will restart automatically once the upgrade is complete.

Time Settings


Click on the Time Settings link under the Management menu. This page allows you
to configure the time on the device. You may do this manually or by connecting to a
NTP server.

Manually Set Date and Time: Specify the date and time

Automatically Get Date and Time: Select the time zone from the drop down list and
then specify the IP address of the NTP server.

Click on the Apply button to save the changes.
27