Table of Contents
Advertisement
This allows users to connect several APs together via BSSID (MAC addresses) to
create a large-scale wireless network. This differs to Bridge Mode because APs set
in WDS Mode can provide local wireless service to wireless clients.
Repeater Mode:
WAP-6010 connects wirelessly to a wireless AP or Router and repeats the signal.
This allows you to extend the distance of your wireless network.
The description below shows the different step for each option.
AP Mode:
The Setup Wizard will guide you through the setting of "Basic Wireless setting" and
"Wireless Security setting".
For AP mode, input the SSID, select if broadcasts SSID and select the radio channel. When
enabling SSID then it can be scanned by the other wireless station/clients. For the radio
channel, choose the one not occupied or choose "AutoSelect" to select the channel
automatically.
10
Advertisement
Table of Contents
