Upgrade Firmware - LevelOne WAP-6010 User Manual

SNMP Settings
Item
snmp Enable text
Read Community
Write Community
Trap Host
Trap Community
System Name
System Location
System Contact
Trap Receiver IP
Address 1
Address 1
Community String
Trap Receiver IP
Address 2
Address 2
Community String
Trap Receiver IP
Address 3
Address 3
Community String
SNMP Traps
Item
Cold Start(0)
Link Down(2)
Linkup(3)
Authentication
Failure(4)

Upgrade Firmware

This page provides the firmware upgrade function. Click the browse button to browse the
file and click "open" button to select the file. The upgrade process takes about 1 minute
and do not power off the device during this period.
Description
Options: Enable/Disable. Select "Enable" to enable this
function. The details setting shows only when enables
this function.
This is password sent with each trap to the SNMP
Manager.
Input the password for the write community. This
function is still under development.
Reserved for the write community.
Reserved for the write community.
Type in the Name of this device.
Type in the Location which is location of device
Type in the Name which is person or group when the
device has problem can find they.
This device supports up to 3 traps.
Type in the IP Address of the first SNMP Manager.
This is password receive with the first trap from the
device (SNMP Agent).
Type in the IP Address of the second SNMP Manager.
This is password receive with the second trap from the
device (SNMP Agent).
Type in the IP Address of the third SNMP Manager.
This is password receive with the third trap from the
device (SNMP Agent).
Description
This is the trap from device after reboot the device.
The trap is sent when any of the links are down.
See the following table.
The trap is sent when any of the links are UP. See
the following table.
The trap is sent when the device receiving gets or
sets requirement with wrong community.
47