LevelOne WAP-6010 User Manual page 32

WPA2-PSK to encrypt the link without additional RADIUS server. This mode requires
only an access point and client station that supports WPA-PSK. For WPA/WPA2,
authentication is achieved via WPA RADIUS Server. You need a RADIUS or other
authentication server on the network.

WPA/WPA2-PSK:

Pass Phrase:
Option: Pass Phrase (8-32 ACSII chars). This mode requires only an access
point and client station that supports WPA-PSK. The WPA-PSK settings
include Key Format, Length and Value. They must be as same as each
wireless client in your wireless network. When Key format is Passphrase, the
key value should have 8-63 ACSII chars.

Key Renewal Interval:
The WPA Algorithm will regroup the key for a period. The default value is
3600 seconds and you can adjust the time interval.

WPA/WPA2:
When selecting WPA/WPA2, you have to add user accounts and the target device
to the RADIUS Server. In the device, you need to specify the Server Network,
Server address, Server Port and Server Key of the target RADIUS server.

WPA Algorithms: TKIP, AES, TKIP/AES. Select the encryption type.
When selecting TKIP/AES, the client can use whether TKIP or AES for
the authentication.

Pre-Authentication Support option: This option only appears when
selecting WPA2 or WPA/WPA2 as the authentication mode. Enable it to
use this function.

Radius Server setting:

IP Address: Input the IP Address of the Radius server.

Port: Input the port of the Radius server. The default port is 1812.

Shared Secret: Input the Authentication Key.

Session Timeout: Input the maximum idle time for this connection.
Ethernet
AP
Wireless Station
31
RADIUS Server