LevelOne WAP-6010 User Manual page 14

N_max wireless access point

Hide thumbs Also See for WAP-6010:

Table of Contents

In the second page, you are required to select the encryption and input the key to associate

the AP. So you must know this information from the AP setting or Wireless ISP.

Bridge Mode:

The setup Wizard will guide you through the WDS basic setting and the Wireless

Encryption. This mode allows two or more Bridge-mode device to combine to a single

distribution system, to bridge the Ethernets behind each Bridge-mode device through the

WDS link. Please be aware that the AP function is disabled in this mode so the Wireless

client/stations can't scan or associate to this device. In the first page, input the MAC

Address of the target Bridge-mode device. The max number of records is 4. Select the

radio channel for this connection.

Note: The target WDS device must be input the MAC Address of this device and use the

same encryption/key and same radio channel.

Table of Contents