Health Advice - Titan SF75 Safety And Operating Manual

HEALTH ADVICE

Warning! When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with,
this dust can be particularly harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY RULES FOR YOUR SPRAY GUN
1. Do not use guns for spraying flammable materials.
2. Do not clean guns with flammable solvents.
3. Beware of any hazard presented by the material being sprayed and consult the
markings on the container or the information supplied by the manufacturer to be
sprayed, including requirements for the use of personal protective equipment.
4. Do not spray any material where the hazard is not known.
5. Never spray near to fire or the heated subjects.
6. Never point the spray gun at people or animals. The high-pressure spray potentiality
causes severe skin damage. Never allow any part of the body to come in contact with
the spray.
7 . Do not eat, drink or smoke in the work area.
8. Provide for sufficient ventilation to keep the air in work area free from accumulation
of flammable vapours.
9. Do not operate the tool without the nozzle locknut.
10. The spray gun is not toy. It must not be used by children or untrained persons.
11. When the container is empty switch off the gun immediately to protect from over
heating and possible damage. Allow the gun to rest for a minimum of 5 minutes.
12. Always use the appropriate safety equipment that is required for the product.e.g.
Goggles/Safety Spectacles,Ear defenders(essential with tools with a noise rating of
over 85dB(A),Golves and face masks,in all cases ensure that the safety equipment is in
good condition!