Installing Anti-Tippers - Invacare Orbit Owner's Operator And Maintenance Manual

SECTION 10—ANTI-TIPPERS/WHEEL LOCKS
Socket
Screws
Wheel Lock

Installing Anti-Tippers

NOTE: For this procedure, refer to FIGURE 10.5.
NOTE: A 1/2‐inch clearance between the bottom of the anti‐tipper wheels and the floor MUST be
maintained at all times
1. Remove the anti‐tippers from accessory carton.
WARNING
Anti-tippers MUST be fully engaged and
release buttons fully protruding out of
adjustment holes.
2. Press the release buttons in and insert
the anti‐tippers into the rear frame
tubing until the buttons lock in place.
™
Orbit
DETAIL "A" - HAND ACTIVATED WHEEL LOCK
Rear Wheel
12-inch
Rear
Wheel
DETAIL "B" - FOOT ACTIVATED WHEEL LOCK
Wheel lock shoe
embedded into
rear wheel tire at
least 3/16-inch
Wheel Lock
Rear Wheel
FIGURE 10.4 Adjusting the Wheel Lock
68
Wheel lock shoe
embedded into
rear wheel tire at
least 3/16-inch
20, 22,
24-inch Rear
Wheel
Release
Button
Wheelchair
Frame
FIGURE 10.5 Installing Anti-Tippers
Anti-Tipper
Part No. 1073955