Table of Contents
Advertisement
8 Anti-Tippers
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
Anti-tippers MUST be attached at all times. Inasmuch as the anti-tippers are an option on
this wheelchair (you may order it with or without the anti-tippers), Invacare strongly
recommends ordering the anti-tippers as an additional safeguard for the wheelchair user.
Ensure both anti-tippers are strongly fixed to the mounting hole on both side.
8.1 Installing Anti-Tippers
NOTE: For this procedure, refer to FIGURE 8.1.
1.
Insert the anti-tipper wheel into the frame vertical tube.
2.
Position the screw in the preset hole (B).
3.
Firmly retighten screw and nut sideways with Allen key 4 mm and spanner 10 mm.
4.
Perform STEPS 1 to 3 on the other side.
NOTE: Make sure that the anti-tipper wheel is ALWAYS located outside the rear wheel volume.
1603966-B
FIGURE 8.1
25
Advertisement
Table of Contents
