SECTION 6—ARMS
Wheelchair Frame
FIGURE 6.6 Adjusting the T-Arms - Adjusting T-Arm Sockets
Adjusting the Transfer Assists and/or Side Guards
NOTE: For this procedure, refer to FIGURE 6.7 on page 47.
1. Remove the T‐arm from the wheelchair. Refer to Installing/Removing the T‐arms on
page 42.
2. Remove the two bottom mounting screws that secure the side guard to the bottom
clamp.
3. Perform one of the following:
• Small Side Guards ‐ Move the bottom clamp up one of two mounting positions in
the side guard.
• Large Side Guards ‐ Move the bottom clamp up one of three mounting positions
in the side guard.
™
Orbit
Optional Locking Pins
(STEP 3)
T-Arm Socket
T-Arm
Socket
Locking Lever
(STEP 8)
T-Arm Clamp
T-Arm
*Mounting Screws
and Washers
(STEP 4)
46
Mounting Screws
(STEPS 2,7)
Washers
(STEPS 2,7)
DETAIL "A"
DETAIL "B"
Part No. 1073955