Delete Photo Or Video; Laser Pointer; File Numbering; Firmware Upgrade - Suntek HC-300 User Manual

e) Press UP to view the previous picture (or video) and DOWN for the next.
f) Press down the select switch to return to info display.
When viewing images, the total number of all images in the SD-card and the index
of the displaying image will be shown respectively.

4.2.2 Delete Photo or Video

The operations are as following:
a) Press Right to display Photos and Videos.
b) Press Menu to select Delete.
c) Press right to select delete current or delete all.
d) Press OK, Cancel and OK are prompted.
e) Press OK to delete the image or video.
Press cancel to cancel, then press MENU and press down the select switch to return
to info display
Please note that after deleting a picture or a video file, the deleted files can't be
restored! Furthermore, in order to delete all the images and video clips in the SD-card, it
is suggested to format the SD-card

4.3 Laser Pointer

The laser pointer can be turned on and is especial y useful when it is somewhat
dark as an additional function for pointing to an object or a certain region of interested
(ROI).
Press﹡ to turn on the laser light in TEST mode and use the tilt adjuster on the
back of camera to adjust the angle of capturing direction.
NOTE: Please note that the laser could be harmful to the eyes if pointed at other
person.

4.4 File Numbering

Images and videos are separately saved in the pre-named folder (104MEDIA). File
numbering continues by adding one to the last number for each new image or video.
The saving name is like PTDC0001.JPB or PTDC0001.AVI.Through the suffix you can
distinguish whether the file is an image(with suffix.jpg)or a video(with suffix.avi).

4.5 Firmware Upgrade

This camera is equipped with an automatic upgrade function for you. Upgrading is
needed only when an improved firmware is available. The operations are as following:
1. Unzip the update file
2. Copy the FW18NA.bin to SD card.
3. Insert the SD card into the camera.
4. Power on the camera（Test Mode）.
5. The camera will read it and update itself automatically. When updating the
camera, its screen is black.
6. The screen will light on after being finished
7. Plug out the SD card, then insert it into pc, delete the FW18NA.bin in the SD
card.(If you don't do this, the camera will enter update mode when power on again).
8. Insert the SD card into the camera for its working.
Page 12