Lubricating In Accordance With The Lubrication Schedule; Pedal Mechanism In Frame Tunnel - Husqvarna ProFlex 21 Operator's Manual

Lubricating in accordance with the
lubrication schedule
The numbers in the following headings refer to the
lubrication points as described in "Lubrication
schedule, PF 18" on page 59 and "Lubrication
schedule, PF 21" on page 60.

1. Pedal mechanism in frame tunnel

Lubricate the pedal mechanism in the frame tunnel.
Remove the cover over the frame tunnel by loosening
the two screws.
Work the pedals and lubricate the moving parts with an
oil can.
Lubricate the cables to the brake and drive pedals with
an oil can.
Lubricate the point "2. Chains in the frame tunnel" on
page 63 before replacing the cover to the frame tunnel.
62
English-
LUBRICATION
PF 21
8009-340
8009-345