Removal Of Bioclip Plug - Husqvarna ProFlex 21 Operator's Manual

Husqvarna mower operator's manual
Table of Contents

Advertisement

Removal of BioClip Plug

To change a Combi unit from the BioClip function to a
cutting unit with rear ejection, remove the BioClip plug,
which is located under the unit, attached with three
screws.
1.
Put the unit in service position, see "The cutting
unit's service position" on page 51.
2.
Remove the three screws holding the BioClip plug,
and remove the plug.
Tip: Fit three full-thread screws M8x15 mm in the
screw holes to protect the threads.
3.
Return the unit to the normal position.
Fit the BioClip plug in the reverse order.
58
English-
MAINTENANCE
Removal of BioClip Plug
8009-289

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider proflex 18Rider proflex 21

Table of Contents