Lubricating In Accordance With The Lubrication Schedule; Pedal Mechanism In Frame Tunnel - Husqvarna Rider ProFlex 21 Operator's Manual

Lubricating in accordance with the
lubrication schedule
The numbers in the following headings refer to the
lubrication points as described in "Lubrication
schedule, PF 18" on page 59 and "Lubrication
schedule, PF 21" on page 60.

1. Pedal mechanism in frame tunnel

PF 18
Lubricate the pedal mechanism in the frame tunnel.
Remove the cover of the frame tunnel by loosening
the screws, two on each side.
PF 21
Lubricate the pedal mechanism in the frame tunnel.
Remove the cover of the frame tunnel by loosening
the screws (two on the steering servo housing).
Work the pedals and lubricate the moving parts with an
oil can.
Lubricate the cables to the brake and drive pedals with
an oil can.
Lubricate the point "2. Chains in the frame tunnel" on
page 63 before replacing the cover to the frame tunnel.
62
English-
LUBRICATION
PF 18
PF 21
6008-211
8009-340
8009-345