Husqvarna ProFlex 21 Operator's Manual page 50

1. Attach the unit to the equipment frame's outer
hooks.
2. Pull out the catch (A) and loosen the safety catch
by pushing its handle (D) back.
3. Raise the unit by pulling up the mechanical lifting
lever, located on the driver's right side.
4. Push the unit in so that the interior plugs (B) touch
the bottom of the equipment frame's grooves.
5. Hook in the height adjustment strut's (E) rear
fastener:
Move the cutting height lever to the forward
position. Loosen the strut by pulling the frame's
forward section up or down.
WARNING!
Watch your fingers. Do not turn the
blades or the belt.
48
English-
MAINTENANCE
8009-024
D
A
8009-167
8009-018
E
8009-168