Parking Brake; Seat; Fuelling - Husqvarna ProFlex 21 Operator's Manual

Parking brake

The parking brake is activated as follows:
1. Press the brake pedal.
2. Completely depress the lock button on the
steering servo housing.
3. Release the brake pedal while keeping the button
pressed in.
The parking brake lock is automatically disengaged
when the brake pedal is pressed down.

Seat

The seat has a hinged mounting on the front edge and
can be tipped forwards.
The seat can also be adjusted lengthways.
When making adjustments, the lever under the front
edge of the seat is moved to the left, after which the
seat can be moved backwards or forwards to the
desired position.

Fuelling

The engine should be run on a minimum of 87-octane
unleaded petrol (no oil mix). It can be beneficial to use
environmentally adapted alkylate petrol. See also
"Technical Data" concerning methanol and ethanol
fuels.
Do not fill the tank completely, leave an expansion area
of at least 2.5 cm (1").
WARNING!
Petrol is highly flammable. Observe
caution and fill the tank outdoors,
(see the safety instructions).
PRESENTATION
8009-328
8009-548
8009-330
19
English-