Weider WEEVSY2996.1 User Manual page 26

Weider pro 5500 weight system
Table of Contents

Advertisement

USING THE CURL PAD
To use the Curl Pad (33), remove the indicated 50mm
Round Inner Cap (39) and insert the Curl Post (11)
into the Front Leg (10). Tighten the Curl Adjustment
Knob (58) into the Front Leg. Make sure the
Adjustment Knob passes through a hole in the Curl
Post.
33
11
When you are performing exercises that do not
require the Curl Pad (33), remove the Curl Pad and
39
58
reinsert the 50mm Round Inner Cap (39) into the
Front Leg (10). Note: You must remove the Curl
10
Pad to use the press arms.
ADJUSTING THE BACKREST
2
The Backrest (31) can be adjusted to provide the cor-
rect position for each exercise. To adjust the
Backrest, loosen but do not remove the Backrest
53
31
Adjustment Knob (53) and pull it out. Move the
Backrest into or out of the Upright (2). Insert the
Adjustment Knob into the Upright and through the
Backrest Frame (not shown). Tighten the Adjustment
Knob.
32
The Seat (32) can be adjusted in the same manner.
LOCKING THE WEIGHT STACK
To lock the weight stack, insert the Lock Pin (72)
18
through one of the holes in the Weight Guides (18)
72
and secure the Lock Pin with the Lock (73).
73
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro 5500

Table of Contents