Weider WEEVSY2996.1 User Manual
  1. Manuals
  2. Brands
  3. Weider Manuals
  4. Home Gym
  5. WEEVSY2996.1
  6. User manual

Weider WEEVSY2996.1 User Manual

Weider pro 5500 weight system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Model No. WEEVSY2996.1
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WEEVSY2996.1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Weider WEEVSY2996.1

Summary of Contents for Weider WEEVSY2996.1

  • Page 1 If you have questions, or if there are missing or damaged parts, please call: 08457 089 009 Or write: ICON Health & Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road, Beeston Leeds, LS11 8JG email: csuk@iconeurope.com...

  • Page 2: Table Of Contents

    If the decal is missing or illegible, call the telephone number on the front cover of this manual and order a free replacement decal. Apply the replacement decal in the location shown. WEIDER is a registered trademark of ICON IP, Inc.

  • Page 3: Important Precautions

    35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

  • Page 4: Before You Begin

    The muscle group of the body. Whether your goal is to tone model number is WEEVSY2996.1. The serial number your body, build dramatic muscle size and strength, or can be found on a decal attached to the weight system improve your cardiovascular system, the weight system (see the front cover of this manual).

  • Page 5: Part Identification Chart

    PART IDENTIFICATION CHART— Model No. WEEVSY2996.1 R0107A Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 33 of this manual. Note: Some small parts may have been preattached.
  • Page 6 PART IDENTIFICATION CHART— Model No. WEEVSY2996.1 R0107A M8 x 69mm Shoulder Bolt (87) M8 x 75mm Carriage Bolt (83) M10 x 65mm Bolt (85) M10 x 75mm Bolt (82) M8 x 80mm Bolt (100) M8 x 65mm Bolt (101) M10 x 65mm Button Bolt (106)
  • Page 7 PART IDENTIFICATION CHART— Model No. WEEVSY2996.1 R0107A Backrest Adjustment Knob (53) Curl Adjustment Knobf (58) Seat Adjustment Knob (52)

  • Page 8: Assembly

    ASSEMBLY Make sure you have the following tools: Make Assembly Easier • Two adjustable wrenches Everything in this manual is designed to • One standard screwdriver ensure that the weight system can be assem- bled successfully by anyone. Before begin- •...

  • Page 9: Frame Assembly

    Frame Assembly Before beginning assembly, make sure you understand the information in the box on page 8. See the PART IDENTIFICATION CHARTS on pages 5 - 7 of this manual for help identifying small parts. Insert four M8 x 75mm Carriage Bolts (83) up through the Base (1).
  • Page 10 4. Attach the Frame (9) to the Upright (2) with two M8 x 80mm Bolts (100), two M8 Washers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. Attach the Frame (9) to the Front Leg (10) with two M8 x 65mm Bolts (101), two M8 Washers (103), and two M8 Nylon Locknuts (78).
  • Page 11 7. Attach the Top Frame (4) to the Upright (2) with two M8 x 80mm Bolts (100), two M8 Washers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. Attach the Weight Guides (18) to the Top Frame (4) with two M10 x 20mm Button Screws (96) and two M10 Washers (80).

  • Page 12: M10 X 75Mm Button

    Arm Assembly 10. Attach the Butterfly Frame Brace (6) to the Upright (2) with two M8 x 80mm Bolts (100), two M8 Washers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. 11. Apply grease in the locations shown. Insert a Grease 56.5mm Spacer (69) the indicated hole in the Leg Lever (12).
  • Page 13 13. Apply grease to the locations shown and attach the Left Butterfly Bracket (28) to the Butterfly Frame (5) with an M10 x 80mm Bolt (84) and an M10 Nylon Locknut (77). Repeat this step for the Right Butterfly Grease Bracket (29).
  • Page 14 16. Orient a Press Arm Handle (17) with the 90° bend at the top as shown in the inset drawing. Attach a Press Arm Handle (17) to the Right Press Arm (16) with two M10 x 65mm Button Bolts (106), four M10 Washers (80), four 11mm Spacers (99), 90°...

  • Page 15: Cable Assembly

    Cable Assembly 19. See the CABLE DIAGRAM on page 28 to identify the cables as you assemble them. Grease Identify the Butterfly Cable (50). Grease an M8 x 22mm Shoulder Bolt (90). Attach the Cable to the Left Butterfly Bracket (28) with the Shoulder Bolt and an M8 Nylon Locknut (78).
  • Page 16 22. Wrap the Butterfly Cable (50) over a “V”-pulley (47). Attach the “V”-pulley, a Long Cable Trap (57), an M10 Washer (80), and two Guards (54) to the Upright (2) with an M10 x 60mm Bolt (79) and an M10 Nylon Locknut (77). 23.
  • Page 17 25. Route the Lat Cable (49) over a Thin Pulley (24) and down through the Top Frame (4). Hold the Thin Pulley inside the Top Frame. Insert an M10 x 80mm Bolt (84) through an M10 Washer (80), a 19mm Spacer (67), the Top Frame, and the Thin Pulley.

  • Page 18: M12 Large

    28. Wrap the Lat Cable (49) over a 90mm Pulley (48) and route the Cable down through the Top Frame (4). Attach the Pulley to the Top Frame with an M10 x 80mm Bolt (84), two M10 Washers (80), two 19mm Spacers (67), and an M10 Nylon Locknut (77).
  • Page 19 31. Attach a 90mm Pulley (48) inside the Front Leg (10) with an M10 x 65mm Bolt (85), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77). Make sure the Leg Lever Cable (51) is under the Pulley. 32.
  • Page 20 34. Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley to the Base (1) with an M10 x 45mm Bolt (86), two Half Guards (55), and an M10 Nylon Locknut (77). 35. Wrap the Leg Lever Cable (51) over a 90mm Pulley (48).
  • Page 21 37. Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley to the Right Press Arm (16) with an M10 x 50mm Bolt (97), two Half Guards (55), a Cable Trap (56), an M10 Washer (80), and an M10 Nylon Locknut (77). Make sure the Cable Trap and Half Guards are oriented as shown.

  • Page 22: M6 X 60Mm Button

    40. Attach the Leg Lever Cable (51) to the Upright (2) with the M10 x 120mm Bolt (115), an M10 Washer (80), a 7mm Spacer (111), and an M10 Nylon Locknut (77). Seat Assembly 41. Attach the Right Butterfly Pad (35) to the Right Butterfly Arm (26) with two M6 x 60mm Button Screws (91) and two M6 Washers (114).
  • Page 23 43. Attach the Seat (32) to the Seat Frame (8) with two M6 x 16mm Screws (88), an M6 x 32mm Screw (89), and an M6 Washer (114). Insert the Seat Frame (8) into the Frame (9). Tighten the Seat Adjustment Knob (52) into the Frame and the Seat Frame.
  • Page 24 46. Attach the Curl Pad (33) to the Curl Post (11) with two M6 x 16mm Screws (88). 47. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page. Before using the weight system, pull each cable a few times to make sure that the cables move smoothly over the pulleys.

  • Page 25: Adjustments

    ADJUSTMENTS This section explains how to adjust the weight system. Refer to the accompanying exercise guide to see the cor- rect form for each exercise. Make sure that all parts are properly tightened each time you use the weight system. Replace any worn parts immediately.
  • Page 26 USING THE CURL PAD To use the Curl Pad (33), remove the indicated 50mm Round Inner Cap (39) and insert the Curl Post (11) into the Front Leg (10). Tighten the Curl Adjustment Knob (58) into the Front Leg. Make sure the Adjustment Knob passes through a hole in the Curl Post.

  • Page 27: Weight Resistance Chart

    LOCKING THE LEG LEVER To lock or unlock the Leg Lever (12), remove the Lock Plate Pin (95) from the Lock Plate (14). Move the Lock Plate to either the position shown on the Front Leg (10), or the indicated hole in the Leg Lever. Insert the Lock Pin back through the Lock Plate.

  • Page 28: Cable Diagram

    CABLE DIAGRAM The cable diagram shows the proper routing of the cables (49, 50, 51). Use the diagram to make sure that the cable and the cable traps have been assembled correctly. If the cable has not been correctly routed, the weight system will not function properly and damage may occur.

  • Page 29: Maintenance

    MAINTENANCE Make sure all parts are properly tightened each time you use the weight system. Replace any worn parts immediately. The weight system can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the weight system, can stretch slightly when it is first used.

  • Page 30: Exercise Guidelines

    EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS PERSONALIZING YOUR EXERCISE PROGRAM Muscle Building Determining the exact length of time for each workout, To increase the size and strength of your muscles, as well as the number of repetitions or sets completed, push them close to their maximum capacity.

  • Page 31: Muscle Chart

    Rest for a short period of time after each set. The slowly as you stretch and do not bounce. Ease into ideal resting periods follow: each stretch gradually and go only as far as you can • Rest for three minutes after each set for a muscle without strain.
  • Page 32 EXERCISE WEIGHT SETS REPS MONDAY Date: AEROBIC EXERCISE TUESDAY Date: EXERCISE WEIGHT SETS REPS WEDNESDAY Date: THURSDAY AEROBIC EXERCISE Date: EXERCISE WEIGHT SETS REPS FRIDAY Date: Make photocopies of this page for scheduling and recording your workouts.

  • Page 33: Part List

    PART LIST—Model No. WEEVSY2996.1 R0107A Qty. Description Qty. Description Qty. Description Base Butterfly Arm Cap M8 x 69mm Shoulder Upright Bolt Cap Bolt Stabilizer Butterfly Arm Bushing M6 x 16mm Screw Top Frame Butterfly Bracket M6 x 32mm Screw Butterfly Frame...

  • Page 34: Exploded Drawing

    EXPLODED DRAWING—Model No. WEEVSY2996.1 R0107A...
  • Page 35 EXPLODED DRAWING—Model No. WEEVSY2996.1 R0107A...

  • Page 36: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4, Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG Tel: 08457 089 009...

This manual is also suitable for:

Pro 5500

Table of Contents

Save PDF