Ford F-650 2015 Owner's Manual page 253

252
Aluminum Rear Disc Wheel with Flange Nuts (Hub-piloted).
C
B
A
Note for aluminum wheels: Clean each wheel locator pad on the hub
from all dirt, rust and foreign material prior to re-installing rear
aluminum hub-piloted wheels. Apply a light coat of chassis grease,
never-seize or disc brake corrosion control grease, only to the wheel
locator pad.
3. Run the nuts on the studs until they contact the wheel(s). Rotate the
wheel assembly a half-turn to permit the parts to seat.
4. Draw-up the nuts alternately following the crisscross sequence
illustrated under the following wheel tightening sequence illustrations.
Do not fully tighten the nuts. This allows uniform seating of the nuts and
makes sure even face-to-face contact of the wheel and hub.
2015 F-650/750 (f67)
Owners Guide gf, 2nd Printing, April 2014
USA (fus)
Wheels and Tires
A. Flange nut
B. Wheel(s)
D
C. Brake drum
D. Wheel stud (22 millimeter)
E. Wheel hub
E
F. Wheel locator pad
F
8–lug wheel