Ford F-650 2015 Owner's Manual page 252

After properly tightening the rim or wheel, check it for proper alignment.
Rotate the wheel with a piece of chalk attached to a steady, firm surface,
and placed to just barely clear the outside surface of the tire bead seat;
this procedure points out the high spot. A high spot does not necessarily
indicate unevenly tightened lug nuts, but may be the result of a bent
wheel.
Use the following installation procedure:
1. Slide inner rear or front tire and wheel in position over studs and push
it back as far as possible. Use care so you do not damage the threads on
the studs.
Disc Wheel with Flange Nuts (Hub-piloted).
C
B
A
2. Position the outer rear tire and wheel in place over the studs and
push it back as far as possible. Use care so you do not damage the
threads on the studs. Orient (clock) the outer wheel on the hub so it
allows access and clearance to the inner valve stem.
B
A
2015 F-650/750 (f67)
Owners Guide gf, 2nd Printing, April 2014
USA (fus)
Wheels and Tires
Front wheel mounting of flange nut
system.
A. Flange nut
B. Wheel(s)
D
C. Brake drum
D. Wheel stud (22 millimeter)
E
E. Wheel hub
Rear wheel mounting of flange nut
system.
A. Flange nut
C
B. Wheel(s)
C. Brake drum
D. Wheel stud (22 millimeter)
D
E. Wheel hub
E
251