Replacing Brake, Tail, Rear Turn Signal, Reverse, and License
Plate Lamp Bulbs
BULB SPECIFICATION CHART
Replacement bulbs specifications are in the chart below. Headlamp bulbs
must be marked with an authorized D.O.T. for North America and an E
for Europe to make sure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs do not damage the lamp assembly or
void the lamp assembly warranty, and provide quality bulb illumination
time.
Function
Headlamps
Front turn signal lamps
Front sidemarker lamps, parking
lamps
Brake lamps, tail lamps, stop lamps,
rear turn signals lamps, license plate
lamps
Back up lamps
Front clearance and identification
lamps
Dome lamp
Note: To replace all instrument panel lights, see an authorized dealer.
2015 F-650/750 (f67)
Owners Guide gf, 2nd Printing, April 2014
USA (fus)
Maintenance
1. Remove the four screws and the
lamp lens from the lamp
assembly.
2. Carefully pull the bulb straight
out of the socket.
3. Reverse the procedure to install
the new bulb.
Number of
Bulbs
2
2
2 (amber)
1 (each side)
2
5
1
233
Trade Number
H6054
1157
194
1157
1156
194
105