Yaesu FT-1907R Operating Manual page 77

8 BNK.LNK
Function: Selects the Memory Bank(s) for the Memory Bank Link Scan.
See page 46 for details.
9 BNK NM
Function: Programming an Alpha/Numeric label for a Memory Bank.
See page 38 for details.
10 CLK.SFT
Function: Shifting of the CPU clock frequency.
Available Values: ON / OFF
Default: OFF
This function is only used to move a spurious response "birdie," should it fall on a desired
frequency.
11 CW ID
Function: Enables/Disables the CW identifier during ARTS Operation.
Available Values: ON / OFF
Default: OFF
12 CWTRNG
Function: Enables/Disables the CW Training feature and selects the sending speed of the
Morse Code groups.
Available Values: 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 15 / 17 / 20 / 24 / 30 / 40 WPM / OFF
or 20 / 25 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 65 / 75 / 85 / 100 / 120 / 150 / 200 CPM
Default: OFF
Note: To switch units between "WPM" and "CPM," just press the [ MHz ( SET )] key.
13 DC VLT
Function: Indicates the DC Supply Voltage.
14 DCS CD
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes
Default: 023
15 DCS RV
Function: Enables/Disables "Inverted" DCS
code decoding.
Available Values: ENABLE / DISABL
Default: DISABL
FT-1907R O
PERATING
"S
M S
ENU ELECTION
M
ANUAL
" M
ET ENU
D
ETAILS
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754
M
ODE
– – – – – –
73