Yaesu FT-1907R Operating Manual page 73

M I F
ENU TEM UNCTION
29 MW MD Selects the method of selection of channels for Memory Storage.
30 NM SET Programming an Alpha/Numeric label for a Memory Channel.
31 OPN.MSG Selects the Opening Message that appears when the radio is pow-
ered on.
32 PAGER Enables/Disables the Enhanced CTCSS Paging & Code Squelch
function.
33 PAG.ABK Enables/Disables the Answer Back function of the Enhanced CTCSS
Paging & Code Squelch function.
34 PAG.CDR Setting the Receiver Pager Code for the Enhanced CTCSS Paging
& Code Squelch function.
35 PAG.CDT Setting the Transmitting Pager Code for the Enhanced CTCSS Pag-
ing & Code Squelch function.
Programming the function assigned to Microphone's [ P1 ] key.
36 PRG P1
Programming the function assigned to Microphone's [ P2 ] key.
37 PRG P2
Programming the function assigned to Microphone's [ P3 ] key.
38 PRG P3
Programming the function assigned to Microphone's [ P4 ] key.
39 PRG P4
40 PSWD Programs and activates the Password feature.
41 RESUME Selects the Scan Resume mode.
42 RF SQL Adjusts the RF Squelch threshold level.
43 RPT Sets the Repeater Shift direction.
44 RVRT Enables/Disables the "Priority Channel Revert" feature.
45 S SRCH Selects the Smart Search Sweep mode.
46 SHIFT Sets the magnitude of the Repeater Shift.
47 SKIP Selects the Memory Scan mode.
48 SPLIT Enables/Disables the split CTCSS/DCS coding.
49 SQL.TYP Selects the Tone Encoder and/or Decoder mode.
50 STEP Sets the Synthesizer steps.
51 TEMP Indicats the current temperature inside the transceiver's case.
52 TN FRQ Setting of the CTCSS Tone Frequency.
53 TOT Sets the Time-Out Timer.
54 TS MUT Enables/Disables the receiver audio output during the Tone Search
Scanner is activated.
55 TS SPD Selects the Tone Search Scanner speed.
56 VFO.SCN Select the VFO Scanner Width.
59 W/N DV Reduction of the Microphone Gain/Deviation and receiver bandwidth.
FT-1907R O
PERATING
"S
M
ANUAL
" M
ET ENU
A
VAILABLE
NEXT / LOWER
DC / MSG / OFF
ON / OFF
ON / OFF
ARTS / DC VLT / DIMMER /
MCGAIN / SKIP / SQL OFF /
S SRCH / C SRCH / SCAN /
T CALL
one of the Set Menu items
BUSY / HOLD / 3SEC / 5SEC /
10SEC
S1 - S9 or OFF
-RPT / +RPT / SIMP
ON / OFF
SINGLE / CNTNUE
0.00-99.95 ( MHz )
SKIP / ONLY / OFF
ON / OFF
TONE / TSQL / DCS / RV TN / OFF
5k / 10k / 12.5k / 15k / 20k /
25k / 50k / 100k ( Hz )
50 standard CTCSS tones
1MIN / 3MIN / 5MIN / 10MIN / OFF
ON / OFF
FAST / SLOW
±1MHz / ±2MHz / ±5MHz / ALL
WIDE / NARROW
M
ODE
V D
ALUES EFAULT
NEXT
--- ---
DC
OFF
OFF
--- 05_47
--- 05_47
SQL OFF
S SRCH
C SRCH
T CALL
- OFF
BUSY
OFF
SIMP
OFF
SINGLE
7.60 ( MHz )
OFF
OFF
OFF
25 kHz
--- ---
100.0 ( Hz )
3MIN
ON
FAST
ALL
WIDE
69